How to stop paint bubbles when painting a door?

Paint bubbles form when the paint is unable to adhere to the surface underneath. This can be caused by using the wrong type of paint, or by painting on a surface that is either damp, dusty, or too hot. One common misconception when it comes to painting outdoors is that you should do so on a very, very hot day. While it is good to paint when the weather is warm and dry you should try not to paint something that is directly exposed to the sun. So, wait until the sun is not shining on your front door before you paint it!

How to stop blocking and sticking when painting a door?

Paint blocking is the term that is used to describe two surfaces that have been freshly painted, and that stick together when they are placed next to each other. This can occur with low-quality paints, and it can also happen if you paint a door or window then close it too quickly, not giving it time to dry. Ideally, if you are painting a door you should remove it from the doorway and lay it flat, paint it and then give it plenty of time to dry before re-hanging it. Take the time to prime and sand the surface that you plan on painting, and follow the manufacturer’s recommendations regarding topcoats and finishes.

How to stop foaming and catering when painting a door?

Foaming and cratering is a common issue that can have a huge number of causes. It is normal for very small bubbles to form while you are painting a surface, but with high-quality paints the bubbles will break easily to leave a smooth finish. If you use low-quality paint, bubbles are more likely, and they can also form if you shake a can of paint that is only partially filled, or if you apply paint too quickly using a roller. For best results, purchase the best quality paint you can afford, prime the surface before painting, and work slowly and methodically.

How to stop lap marks when painting a door?

Lap marks are lines of paint that are denser or darker than other areas of paint. They appear if you apply paint over an area that was painted earlier and has already started to dry. The best way to prevent these unsightly marks is to make sure that there is always a “wet edge”. Try to paint in small segments, working quickly enough that you don’t leave a dry area. Paint “wet to dry”, working towards the unpainted area then back in and over the just-painted section for a smooth and professional finish.

How to stop roller marks when painting a door?

Most of the problems that occur when painting doors are things that can be prevented if you use good quality paint and work methodically. If you rush the job or keep having to stop because of distractions, that’s where problems will start. Give yourself plenty of time to complete your paint job and prime the surface of the door before you start work. As with any other DIY task, taking the time to do it properly the first time is much more efficient than rushing the job. When you rush, you just end up needing to re-do it because of unsightly streaks, cracks, bubbles, or lap marks.

How to stop brush marks when painting a door?

If you have a door with a lot of detailing, you may want to paint it with a brush rather than a roller. While a brush is more work, it's far easier to get into indentations and carvings than a roller. Some people also just prefer the control a brush offers. Unfortunately, using a brush does leave you prone to brush marks but with just a few simple tips - you can minimise this. Make sure your door is smooth and clean so the paint will properly adhere. Next, apply your primer. Start with the hard-to-cut inside parts of your door with a thin layer of paint. This makes it easier to brush out into the main section of the door. If you paint it thin layers, it will make it easier to build up without leaving streaks or an uneven finish. Between each layer, give the door a light sand. This will help keep the finish even and make the next layer more adhesive.

Doors Archives | Aspire Doors

December 20, 2021

Door Repair or Door Replacement: Which is Right for Me?

Front door repair is one of the most important aspects of door maintenance. As the primary entryway to most houses, front doors can often become worse for wear over time. Not only can an old door affect your home's aesthetic, but it can also become a security risk. ...

External Doors

External Bi-Fold Doors

External French Doors

External Sliding Doors

External Front Doors

External Back Doors

Internal Doors

Internal Bi-Fold Doors

Internal Folding French Doors

Internal French Doors

Internal Single Doors

By Style

Black Internal Doors

Cottage Internal Doors

Mexicano Internal Doors

Modern Internal Doors

Oak Internal Doors

White Internal Doors

Accessories

External Door Frames

Internal Door Handles

Internal Door Latches

Internal Shoot bolts

External Bi-Fold Doors

External French Doors

External Sliding Doors

External Front Doors

External Back Doors

External French or Bi-fold Doors?...

Aspire Doors Collection: External Doors with Glass...

Internal Bi-Fold Doors

Internal Folding French Doors

Internal French Doors

Internal Single Doors

August 29, 2023

Biophilic Futurism: Popular Buildings Reimagined (Covered in Plants)...

July 18, 2023

What are Edwardian Doors?...

External Door Frames

Internal Door Handles

Internal Door Latches

Internal Shoot bolts

Category: Doors

December 20, 2021

Call our team

Visit our Essex showroom!

Send us an email